Back
Benefits
Members
Sponsors and Partner
Products
Test methods
Product certification
Inspection
Damage analysis
Conferences
Courses
Degrees
Online
In-house-training
SKZ Whitepaper
Material
Process
Metrology
Circular Economy
Digitalisation
Enabler projects
Quality policy
Certification procedure
Downloads
Our Mission
Locations
Career
News
With us you are always on the right track. Your way to us.
With us you are always on the right track. Your way to us.
locations

Our locations

Our headquarter is located in Würzburg.
The following areas can be found there:

Testing 
Training and further education 
Research and development
Certification of management systems 

The three locations in Germany - Halle, Peine and Horb - enable us to transfer knowledge nationwide for the area of training and further education for specialists and managers. The European Centre for Dispersion Technologies – EZD for short – was established in 2014 at the SKZ site in Selb. There we deal with the production and characterisation of dispersions with the main focus on resin development.

The future of plastics processing is also in the starting blocks: After the grant notification from the Free State of Bavaria was handed over, construction work for the model factory began at the SKZ on 25 May 2020. Completion is planned for September 2022, when more than 100 employees will work together across departments on three floors.

But we also work for the plastics industry beyond Europe's borders. Since 2009, for example, we have been offering certified training courses for plastic pipe welders for HDPE pipe networks in the gas and water supply sector together with our partner BMC Gulf LLC in Dubai.

Hotels · Anreise · Adressen · Schwerpunkte

Würzburg (Headquarter)

SKZ Technology Center
Friedrich-Bergius-Ring 22
D-97076 Würzburg
T. +49 931 4104-0

Calculate route


The SKZ headquarter is located in the Technology Center.
Take a look at our technical centers: start virtual tour
 

Focus areas

  • Accredited testing laboratory 
  • Certification of management systems
  • Administration
     

Arrival

Arrival by car

  • Coming from Würzburg/Stadtmitte: 
    B8 direction Lengfeld, then exit Lengfeld/Gewerbegebiet-Ost
  • Coming from the A3:  
    Exit Würzburg Rottendorf (No. 72) onto B8 direction Würzburg, then from B8 exit Gewerbegebiet-Ost/Gattinger-Straße
  • Coming from the A7:
    AB-Kreuz Biebelried A3 direction Würzburg, exit Würzburg Rottendorf (No. 72) onto B8 direction Würzburg, then from B8 exit Gewerbegebiet-Ost/Gattinger-Straße

Parking

  • A limited number of parking spaces are available at the SKZ Technology Center
  • Alternatively, free parking is also available in the surrounding streets.

SKZ supports electric mobility!
If you are arriving with an electric vehicle, you are welcome to use our charging stations standard EN 62196 Type 2 (20 kW) free of charge. You will receive the chip card at reception. The charging station is located directly on the west side of the building parallel to Friedrich-Bergius-Ring.


Arrival by public transportation
At the main station, take bus no. 26 in the direction of Wöllriederhof/Pilziggrund to the Sandäcker stop. Then approx. 7 min walk (approx. 500 m).
The bus also stops at Briefzentrum at irregular intervals. From there approx. 4 min walk (240 m).

To the timetable


SKZ model factory
Friedrich-Bergius-Ring 21
D-97076 Würzburg
T. +49 931 4104-0

Calculate route


Focus areas

  • Research & Development
  • Further training in the field of machine processing
     

Arrival

Arrival by car

  • Coming from Würzburg/Stadtmitte:
    B8 direction Lengfeld, then exit Lengfeld/Gewerbegebiet-Ost
  • Coming from the A3:  
    Exit Würzburg Rottendorf (No. 72) onto B8 direction Würzburg, then from B8 exit Gewerbegebiet-Ost/Gattinger-Straße
  • Coming from the A7:
    AB-Kreuz Biebelried A3 direction Würzburg, exit Würzburg Rottendorf (No. 72) onto B8 direction Würzburg, then from B8 exit Gewerbegebiet-Ost/Gattinger-Straße

Parking

  • A limited number of parking spaces are available at the SKZ-Modellfabrik
  • Alternatively, free parking is also available in the surrounding streets.

SKZ supports electric mobility!
If you are arriving with an electric vehicle, you are welcome to use our charging stations standard EN 62196 Type 2 (20 kW) free of charge. You will receive the chip card at reception. The charging station is located directly on the west side of the building parallel to Friedrich-Bergius-Ring.


Arrival by public transportation
At the main station, take bus no. 26 in the direction of Wöllriederhof/Pilziggrund to the Sandäcker stop. Then approx. 7 min walk (approx. 500 m).
The bus also stops at Briefzentrum at irregular intervals. From there approx. 4 min walk (240 m).

To the timetable 


SKZ Training Center Welding
Frankfurter-Straße 19 c
D-97082 Würzburg
T. +49 931 4104-149

Calculate route
 

Focus areas

  • Welding in tank, apparatus and plant construction
  • Underground plastic piping construction
  • Bonding technology

The site is a recognized course center of:

  • German Technical and Scientific Association for Gas and Water (DVGW)
  • German Association for Welding and Allied Processes (DVS)
  • Institute for Plastics Processing (IKV)
     

Arrival

Arrival by car

  • Coming from Frankfurt (A3): Exit Helmstadt B8 or exit Kist B27
    From the direction of Stuttgart (A81): Exit Gerchsheim B27, after Höchberg (get into the left lane) towards Würzburg Nord (B8), in Würzburg through Höchberger Str. and Wörthstr., at the first traffic lights turn left into Frankfurter Str. SKZ training center is on the left hand side.
  • Coming from Nuremberg (A3): Exit Heidingsfeld, Stadtring direction Heidingsfeld, at the 2nd exit direction Congress Centrum/Festung Marienberg, through Mergentheimer Str. and Saalgasse, after the Old Main Bridge turn left into Zeller Str., cross the large traffic light junction into Frankfurter Str. SKZ training center is on the left hand side.

Parking

  • A limited number of parking spaces are available at the SKZ Training Center
  • Alternatively, we recommend the public parking lot "Talavera". From there, the SKZ can be reached on foot in approx. 10 minutes (750 m).
     

Arrival by public transportation
From the main station, take streetcar line 2 (direction Zellerau) to the Wörthstraße stop or bus line 18 (direction Höchberg/Leibnitzstr.) to the stop Wörthstraße.


To the timetable


SKZ Training Center Quality (TZQ)
Friedrich-Bergius-Ring 21
D-97076 Würzburg
T. +49 931 4104-0

Calculate route
 

Focua areas

  • Practical training
  • Competition and securing skilled workers
  • Teaching for modern quality assurance and quality management
     

Arrival

Arrival by car

  • Coming from Würzburg/Stadtmitte:
    B8 direction Lengfeld, then exit Lengfeld/Gewerbegebiet-Ost
  • Coming from the A3:  
    Exit Würzburg Rottendorf (No. 72) onto B8 direction Würzburg, then from B8 exit Gewerbegebiet-Ost/Gattinger-Straße
  • Coming from the A7:
    AB-Kreuz Biebelried A3 direction Würzburg, exit Würzburg Rottendorf (No. 72) onto B8 direction Würzburg, then from B8 exit Gewerbegebiet-Ost/Gattinger-Str.
     

Parking

  • A limited number of parking spaces are available at the SKZ-Modellfabrik
  • Alternatively, free parking is also available in the surrounding streets.

SKZ supports electric mobility!
If you are arriving with an electric vehicle, you are welcome to use our charging stations standard EN 62196 Type 2 (20 kW) free of charge. You will receive the chip card at reception. The charging station is located directly on the west side of the building parallel to Friedrich-Bergius-Ring.
 

Arrival by public transportation
At the main station, take bus no. 26 in the direction of Wöllriederhof/Pilziggrund to the Sandäcker stop. Then approx. 7 min walk (approx. 500 m).
The bus also stops at Briefzentrum at irregular intervals. From there approx. 4 min walk (240 m).

To the timetable


Halle

SKZ brance office Halle
Training and research center

Köthener Straße 33 a
D-06118 Halle (Saale)
T. +49 345 53045-0

Calculate route
 

Always at your service

The SKZ branch office in Halle is involved in training and research. We now qualify 3,500 participants per year and in research we have specialized in composites (fibre-reinforced plastics). Consulting and testing services complete the portfolio.
 

Focus areas

  • Welding in tank, apparatus and plant construction
  • Underground plastic piping construction/district heating 
  • Fiber-reinforced plastics
  • Bonding technology

The site is a recognized course location of:

  • German Technical and Scientific Association for Gas and Water (DVGW)
  • German Association for Welding and Allied Processes (DVS)
  • Institute for Plastics Processing (IKV)
  • Working Group for District Heating (AGFW)

Historical

The branch office in Halle is a continuation of the plastics technology training activities of the Central Institute for Welding Technology (ZIS) by the SKZ.
 

Arrival

Arrival by car

  • Coming from Leipzig/Dresden (A14): Exit Halle (Saale)/Peißen
    Turn right onto the B100 as far as the Dessauer Brücke (please get into the right-hand lane!), turn left onto Dessauer Str., then immediately right onto the B6 towards Magdeburg, continue on Trothaer Str. as far as the fork in the road, turn half right into Köthener Str., after approx. 200 meters you will find SLV Halle parking lot on the left, SKZ is located on the SLV premises.

  • From the direction of Nuremberg/Munich (A9): at the Schkeuditzer Kreuz junction
    take the A14 in the direction of Halle, exit Halle (Saale)/Peißen
    Approach as from Leipzig/Dresden

  • From the direction of Berlin (A9): at the Schkeuditzer Kreuz junction
    take the A14 towards Halle, exit Halle (Saale)/Peißen
    Approach as from Leipzig/Dresden

  • From the direction of Magdeburg (A14): Exit Halle-Trotha Wettin/B6
    Turn right onto the B6 (Magdeburger Chaussee) towards Halle, get into the left-hand lane in Halle and turn left at the fifth set of traffic lights towards Köthen/Petersberg onto Köthener Straße, after approx. 200 meters you will find SLV Halle parking lot on the left, SKZ is located on the SLV premises.

Parking

  • SKZ Training Center is located on the grounds of the SLV Halle.
  • Sufficient parking spaces are available for participants in the SLV parking lot.


Arrival by train 
From the main station, take the S-Bahn to Halle-Trotha or streetcar lines 2 (from the main station), 3 or 8 (from the city center) in the direction of Halle-Trotha to the terminus.

Horb

SKZ branch office Horb
Training Center

Rauher Grund 9
D-72160 Horb am Neckar
T. +49 7451 62457-11
 

Calculate route

The Horb site focuses extensively on the training and further education of specialists in plastics processing. The processing of thermoplastic semi-finished products and the field of injection molding technology play a particularly important role here. Modern workshops and experienced instructors who are constantly undergoing further training ensure the high quality of the practice-oriented training courses.
 

Focus areas

  • Welding in tank, apparatus and plant construction
  • Underground plastic piping construction
  • Injection molding technologies
  • Tool technology
     

The site is a recognized course location of:

  • German Technical and Scientific Association for Gas and Water (DVGW)
  • German Association for Welding and Allied Processes (DVS)
  • Institute for Plastics Processing (IKV)
     

Historical

The location in Baden-Württemberg was founded in Stuttgart back in 1972 with the aim of providing more effective support for plastics processing companies in south-west Germany.
Since September 2012, the SKZ location in Baden-Württemberg has moved to Horb am Neckar.
 

Arrival

Arrival by car

Coming from Stuttgart (A81): Drive in the direction of Singen; take the Rottenburg/Neckar exit.
Turn right towards Horb, direction Rottweil. Approx. 15 km on the B14; at the first traffic light turn right into the "Industriegebiet Hohenberg". After approx. 300m you will see SKZ on the right-hand side.


From the direction of Singen (A81): Drive in the direction of Stuttgart/Tübingen; take the Horb am Neckar exit. 
Approx. 4 km to Horb; drive through Horb in the direction of Stuttgart (B14). 
Please note: Speed limit 30 - speed control! Approx. 3 km further on, turn left at the second set of traffic lights "Industriegebiet Hohenberg". After approx. 300m you will see SKZ on the right-hand side.

Peine

SKZ branch office Peine
Training Center

Woltorfer Straße 77
D-31224 Peine
T. +49 5171 940996-0

Calculate route
 

In its well-equipped training center, the branch office in Peine offers numerous practice-oriented courses in the areas of "Joining" and "Processing of plastics". For example, courses are offered for injection molding machine setters, toolmakers, machine operators and quality assurance staff. The site is also active in the field of semi-finished product processing with a wide range of courses.
 

Focus areas 

  • Welding in tank, apparatus and plant construction
  • Underground plastic piping construction
  • Injection molding technologies
  • Tool technology
  • Industrial foreman specializing in plastics and rubber
     

The site is a recognized course location of:

  • German Technical and Scientific Association for Gas and Water (DVGW)
    German Association for Welding and Allied Processes (DVS)
    Institute for Plastics Processing (IKV)

 

Historical

The northernmost location was founded in 1991 with the support of the state of Lower Saxony and the city of Peine.
 

Arrival

Arrival by car

  • Coming from Hannover (A2): Exit Peine Ost No. 52
    Turn left (towards Gewerbegebiet Ost), at the traffic circle take the second exit onto Ostrandstr., follow this road until the 3rd traffic light, then turn right onto Woltorfer Str. towards the center, after approx. 1.2 km you will find the Unternehmenspark II on the right-hand side, SKZ is located in Hall G.

  • Coming from Braunschweig (A2): Exit Peine Ost No. 52
    Turn left (towards Gewerbegebiet Ost), at the traffic circle take the second exit onto Ostrandstr., follow this road until the 3rd traffic light, then turn right onto Woltorfer Str. towards the center, after approx. 1.2 km you will find Unternehmenspark II on the right-hand side, SKZ is located in Hall G.

  • Coming from Kassel (A7): Exit Derneburg/Salzgitter No. 63
    Turn right onto the B6 (towards Grasdorf), then turn left onto the B444 (towards Peine), in Peine continue along Ilseder Str. towards the city center, after the north-south bridge turn right onto Woltorfer Str., after approx. 1.2 km you will find Unternehmenspark II on the left-hand side, SKZ is located in Hall G.

Selb - Europäisches Zentrum für Dispersionstechnologien (EZD)

EZD · European Center for Dispersion Technologies
Weißenbacher Straße 86
D-95100 Selb
T. +49 9287 99880-0

Calculate route

The European Centre for Dispersion Technologies (EZD) is an interdisciplinary research and technology transfer center whose main focus is on the production and characterization of dispersions. One focus is on resin development. In order to be able to offer these services to industry, the EZD has a competent team and a wide range of equipment in modern laboratories. The EZD was established at the SKZ site in Selb in 2014.

The areas of application for dispersions include paints and coatings, nanocomposites, adhesives and matrices for fiber composites.
 

Focus areas

Formulation

In the area of formulation, the focus is on the modification and optimization of functional additives for improved dispersibility and final properties of dispersions:

  • Synthesis of new functional additives
  • Surface functionalization of particles
  • Stabilization of micro- and nano-suspensions

Furthermore, we offer you in the field of formulation

  • Wet chemical process for particle synthesis and functionalization
  • Plasma surface treatment
  • Thermal treatment and ashing
  • Freeze-drying
     

Dispersing process

The main focus in the area of dispersing processes is on optimizing dispersing processes and improving dispersing quality:

  • Top-down processes
  • Increasing the energy efficiency of processes
  • Upscaling of dispersion processes

Furthermore, we offer you in the area of dispersing processes:

  • Agitator / dissolver
  • Agitator bead mill
  • Ultrasonic homogenizers
  • Rotor-stator dispersing units
  • Medium and high pressure homogenizer
  • Three-roll mill
  • Laboratory kneader
     

Analytics

In the field of analytics, the focus is on the characterization of particles and dispersions using modern analytical methods. Furthermore, we develop new practical methods for the rapid and, if necessary, non-destructive characterization of dispersions.

Our focus is on the investigation of

  • Particle size and shape
  • dispersion stability
  • Dispersion quality
  • Chemical composition
  • Thermal, rheological and mechanical properties
  • A wide range of modern equipment is available at the EZD for these purposes.
     

Training and knowledge transfer

In addition to research and development, the European Center for Dispersion Technologies also focuses on training and knowledge transfer.

The EZD provides competent and neutral training for employees as well as a concentrated exchange of experience on dispersion-related topics.
 

EZD services:

  • Individual consulting
  • Carrying out market research
  • Product development
  • Process optimization
  • Analytical services
  • Further training and knowledge transfer

The European Center for Dispersion Technologies has three modern laboratories with a wide range of equipment and a competent, interdisciplinary team to deal with your inquiries.

We will be happy to advise you and examine your inquiry individually!
 

Partner

The establishment of EZD is funded by German Plastics Center SKZ and the Bavarian State Ministry of Economic Affairs, Infrastructure, Transport and Technology and supported by the Bavarian Nanotechnology Cluster.

Improvements in the field of dispersing various material systems are of essential importance for a number of industrial partners, who also support EZD financially. In addition, EZD's expertise is being further developed through a close exchange of experience with the application laboratories of equipment manufacturers.
 

Arrival

Arrival by car:
The EZD is located directly at the highway exit A 93 - Selb-West.

Arrival by train: 
Unfortunately, the EZD is not directly accessible by public transport. If you wish to travel by train, please inform us in advance. We will be happy to organize a transfer from the station to the EZD for you.

Arrival by plane:
The nearest airports are Nuremberg, Leipzig and Munich.
 

More about EZD at: www.ezd.eu

Dubai (VAE) – SKZ Middle East

SKZ Training Center Middle East
In cooperation with BMC Gulf

Muntazah Complex (Exit - 25)
Jebel Ali Village - Dubai (VAE)
Phone: +971 4 8845001
Email: info@skz-me.com

Calculate route

 

More information at www.skz-me.com

Sales partner – Italy

PROCHEMA S.r.l.

Via Buonarotti 175,
20900 Monza (MB)
Italy
T. +39 039 281561
info@prochema.it

Calculate route

 

More information at www.prochema.it

Sales partner – Romania

Plastics Bavaria Equipment & Systems srl

Str. Iancu Jianu, nr.26  
RO-500178 Braşov
T +40 268 412 559

Calculate route
 

More information at www.plastics-bavaria.ro

Ihr Browser ist veraltet

Für das beste Nutzererlebnis auf unserer Webseite empfehlen wir die Verwendung eines aktuellen Webbrowsers. Bitte aktualisieren Sie Ihren Browser, um alle Funktionen störungsfrei verwenden zu können.